|
Workbench Clamping Jig
If you have ever found yourself continually repositioning your clamps to fine-tu...
FineWoodworking (free plans)
Try your own Google Search for free woodworking clamps |
|
|
|
Workbench Extension For Extra Clamping
No matter how big and feature-rich your workbench is... sometimes it is just not...
FineWoodworking (free plans)
Try your own free woodworking clamps Google Search |
Total free woodworking plans and project resources in this category: 66. Displaying Page 1.
 |
Band Clamp Strap Holders
I got tired of finding my band clamps all balled up in a drawer, so I devised these ultra-simple holders to keep them in order.
|
| Link Type: free plans | Link Source: WOOD Magazine | Fix Link? |
|
 |
Bar Clamp Extensions
Too many times I have reached for a one-handed bar clamp/spreader only to find that it is too short to do the job at hand. To solve the problem, I created a hardwood splice....
|
| Link Type: free plans | Link Source: WOOD Magazine | Fix Link? |
|
 |
Bench Holdfast
It seems to me that bench holdfasts are a lot less common these days than they used to be. That's too bad -- they're really a great way to secure boards to a workbench. If your bench has holes for bench dogs, you can build one for yourself. All you need is a common bar clamp, a scrap piece of bar stock, and a few minutes.
|
| Link Type: free plans | Link Source: Woodworking Tips | Fix Link? |
|
 |
Bench Vise (PDF)
A simpler but less satisfactory vise can be made by making the wedge-cut square. You may need to scroll down the page to find this project.
|
| Link Type: free plans | Link Source: Purdue | Fix Link? |
|
 |
C-Clamp Handle
I often use a C-clamp when setting up a tool. But sometimes the sliding bar, used to tighten the clamp, gets in the way. Here is a solution.
|
| Link Type: free plans | Link Source: WoodworkingTips | Fix Link? |
|
 |
Clamp Blocks
When edge gluing boards, I use scrap blocks to distribute the clamping pressure and avoid marring the edges. But sometimes the blocks shift out of position or fall to the floor before I get the clamps tightened. To solve this problem, I made a number of U-shaped clamp blocks that slip over the edge and stay right where I put them.
|
| Link Type: free plans | Link Source: WoodworkingTips | Fix Link? |
|
 |
Clamp Blocks for Aligning Miters
A band clamp does a great job of applying even pressure when gluing up boxes and other square projects. But if the project has mitered corners like a picture frame, then a band clamp has problems.
|
| Link Type: free plans | Link Source: WoodworkingTips | Fix Link? |
|
 |
Clamp Cradles, Pipe
Whenever you use pipe clamps to glue up a solid-wood panel (which is quite often), you'll need some way to steady the clamps and keep them from tipping over.
|
| Link Type: free plans | Link Source: WoodworkingTips | Fix Link? |
|
 |
Clamp Holder, Clip On Lamp
I like the extra light that a clip-on lamp gives when I work. The problem is there never seems to be a convenient place to attach one.
|
| Link Type: free plans | Link Source: WoodworkingTips | Fix Link? |
|
 |
Clamp Holder, Overhead
I found that I'd accumulated so many small clamps that storing them was becoming a problem. So I resolved to come up with a storage system that would keep my numerous bar clamps and spring clamps out of the way but still within easy reach. It turned out that the perfect spot was right over my head.
|
| Link Type: free plans | Link Source: WoodworkingTips | Fix Link? |
|
Warning: getimagesize(http://www.freewoodworkingplan.com/graphics15/woodworkingtips-clamp-rack.jpg) [function.getimagesize]: failed to open stream: HTTP request failed! HTTP/1.1 404 Not Found
in /var/www/vhosts/freewoodworkingplan.com/httpdocs/indexmaingetcategory.php on line 73
 |
Clamp Holders, PVC Ceiling Mounted
Like many woodworkers, I don't have a lot of room in my shop. So I try to make the most of the space that I have. Since most of my wall space is already taken up with cabinets and counters, I needed to find a place to store my long pipe clamps. So I turned to the ceiling, as you can see in the photo.
|
| Link Type: free plans | Link Source: WoodworkingTips | Fix Link? |
|
 |
Clamp Pads Magnetic
Whenever I use pipe clamps, I like to place a block of wood between the clamp and my workpiece. This clamping pad helps prevent damaging the surface of the wood. The problem is trying to hold the block in place as you tighten the clamp.
|
| Link Type: free plans | Link Source: WoodworkingTips | Fix Link? |
|
 |
Clamp Pads, Pipe
...I needed to come up with an easy way to protect the wood being clamped. My simple solution is shown in the photo and drawing at [this link]. As you can see, I made a set of wood pads for the jaws of each clamp....”
|
| Link Type: free plans | Link Source: WoodworkingTips | Fix Link? |
|
PVC Clamp Rack
I have accumulated clamps of several different lengths and sizes and needed to c...
Woodsmith (free plans)
Try your own free woodworking clamps Google Search |
|
More free woodworking plans on these pages:1
2
3
4
5
next last
|
|
