| |
|
|
Router Edge Guide
Here is a router edge guide/fence you can build for rabbiting the edge of a board....
HomeConstructionImprovement (free plans)
Try your own Google Search for
jigs, routers, edge guides, free woodworking plans |
Tapered Sliding Dovetail Slot Jig
Make this tapered sliding dovetail slot jig with these instructions for use with your router....
AtelierDuBricoleur (free plans)
Try your own Google Search for
jigs, routers, sliding, dovetail slot jig |
|
Total woodworking resources in this category: 158. Displaying Page 2.
|
Flush Trim Router Fence
...The solution is the tall router table fence you see here. The fence slips over my existing router table fence, so it is quick and simple to attach without using clamps or fasteners.
|
| Link Type: free plans | Wood Source: WoodsmithTips | Fix Link? |
|
|
Horizontal Router Table
This is a link to a Google 3D SketchUp drawing for a horizontal router table. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Not all drawings have the measurements displayed but you can use the measurement tool in SketchUp to easily and accurately determine the dimensions of each lumber part. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.
|
| Link Type: free plans | Wood Source: Google 3D | Fix Link? |
|
|
Horizontal Routing Table
In horizontal mode the fence acts as the tabletop and the table becomes the fence.
|
| Link Type: free plans | Wood Source: WoodworkersInstitute | Fix Link? |
|
|
Install a Base Plate in your Router Table, How to
To mount my router in its new home, I first had to determine exactly where it would fit. I wanted a sloping surface beneath the router to help clear the chips, and I have drawers below that sloping floor to consider.
|
| Link Type: free plans | Wood Source: Binkys Woodworking | Fix Link? |
|
|
Jig for Routing Small Pieces
This is a link to a Google 3D SketchUp drawing for a simple jig for routing small pieces of wood. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Not all drawings have the measurements displayed but you can use the measurement tool in SketchUp to easily and accurately determine the dimensions of each lumber part. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.
|
| Link Type: free plans | Wood Source: Google 3D | Fix Link? |
|
|
Jig on a Non Oak Park Router Table, Mouting an Oak Park Router
I have Bench Dog router table and had purchased the Oak Park 1/4 and 3/8 box joint jigs for it. Since more than likely if you are using other than an Oak Park table, you will have to set it up and drill holes in the top of your router table. It was suggested by another member that I photo this process for the benefit of others so here goes. It will take me a couple posts here to get all the photos loaded up. Note I am installing the 1/4 inch jig.
|
| Link Type: free plans | Wood Source: RouterForums | Fix Link? |
|
|
Jig, Circle Cutting Router (PDF)
Have you unlocked the hidden potentiial of your router? You can with these three top notched router jigs. An excerpt from the ShopNotes Jigs and Accessories issue.
|
| Link Type: free plans | Wood Source: ShopNotes | Fix Link? |
|
|
Jig, Flush Trimming Router
Every now and then, I face the task of trimming the thin edging applied to a piece of melamine. And until recently, a quick, easy way to get the job done had escaped me. But as often happens, when you think about something for long enough, a good solution comes to mind.
|
| Link Type: free plans | Wood Source: WoodworkingTips | Fix Link? |
|
|
Jig, Fluting Router - for turned spindles
By John Lucas - Several years ago I built a jig for my router so that I could cut flutes in spindles that were turned on the lathe. I did this because I needed to make a fluted split turning for an antique clock. It worked great.
|
| Link Type: free plans | Wood Source: WoodCentral | Fix Link? |
|
|
Jig, Mortising - Plunge Router (PDF)
One of the best ways to get the biggest bang from a plunge router is to put it to work routing mortises. The technique, explained in Shopnotes No. 90, is easy to master and the results are topnotch. And the clincher is that, from setup to completion, the whole process takes only a few minutes. The key is the simple-to-build and easy-to-use mortising jig you see here. This supplementary article is available to download in this Online Extra.
|
| Link Type: free plans | Wood Source: ShopNotes | Fix Link? |
|
|
Jig, Plunge Router Mortising (PDF)
It does not cost much or take very long to build. But this unassuming jig will transform an ordinary plunge router into a mortising machine that is capable of turning out perfect-fitting mortises in a matter of seconds. The cutting diagrams and materials list are available to download in this Online Extra.
|
| Link Type: free plans | Wood Source: ShopNotes | Fix Link? |
|
|
Jig, Radius-Cutting
The jig cuts perfect radii with a router using a swinging arm.
|
| Link Type: free plans | Wood Source: DIYNetwork | Fix Link? |
|
|
Jig, Router
Build the Wood Router Jig shown on the right with just a few tools using scraps laying around your shop!
|
| Link Type: free plans | Wood Source: Wayneofthewoods | Fix Link? |
|
More Woodworking Information on these Workshop Pages:first prev 1
2
3
4
5
6
7
8
9
10
11
next last
|
| 
Router Table
Build your own router table with these instructions. Lots of tips and what to avoid as well....
OneProjectCloser (free plans)
Try your own Google Search for
router tables, tools, workshops, free woodworking plans |
| |
