| |
|
|
Basic Bowl
Learn to turn a basic but beautiful bowl using the video and step by step pictures and instructions ...
WoodLogger (free plans)
Try your own Google Search for
lathes, woodturnings, bowls, diy |
Plywood Bowl
Follow along and see how plywood is used to turn this beautiful bowl. Apparently birch plywood is id...
WoodworkersInstitute (free plans)
Try your own Google Search for
lathes, woodturning, bowls, plywood |
|
Total woodworking resources in this category: 30. Displaying Page 2.
|
Bowl, Pedestal
If you love wooden bowls, you will enjoy the accomplishment of designing and turning your own bowls on a wood lathe. It is relatively quick and easy to do once you get the hang of using the lathe and the specific tools required. This decorative wood pedestal bowl can be used for many purposes, such as a salad bowl, storing fruit, shells, etc. The dark, rich walnut wood pedestal and overall design will compliment other furniture and decorations wherever it is displayed in the home.
|
| Link Type: free plans | Wood Source: Lees Wood Projects | Fix Link? |
|
|
Bowl, Segmented - Making one
This article describes the process I used to make this bowl. Information copyright of respective owners.
|
| Link Type: free plans | Wood Source: SawMillCreek | Fix Link? |
|
|
Bowl, Turn a
While some say there are three stages to turning a bowl, for me there are four. Number one is getting the wood. If you go to the wood store it can be expensive in a hurry. While that may be okay for the occasional special piece, I like to start at the firewood pile.
|
| Link Type: free plans | Wood Source: AroundtheWoods | Fix Link? |
|
|
Bowl, Turn a
You can go from block to bowl in one afternoon. It is best to begin with seasoned wood, green wood is likely to warp or crack without proper care.
|
| Link Type: free plans | Wood Source: American Woodworker | Fix Link? |
|
|
Bowl, Turn a Wooden
Each bowl begins as a section of a log, chain-sawn to rough shape and screwed onto the faceplate of my homemade lathe. Next they are turned using gouges and/or boring bars, and sanded smooth while still on the lathe.
|
| Link Type: free plans | Wood Source: Fred Williamson | Fix Link? |
|
|
Bowl, Turning a Simple
I call this turning a simple bowl because I am not using any special tools just bowl gouges and spindle gouges. The shape is a simple one also. I know that when you first start turning bowls trying to get the surface cut cleanly on the end grain areas can present a problem. Reversing the bowl to finish the bottom can also present a challenge. I hope that this tutorial will help answer a few questions on turning a cross grain oriented bowl.
|
| Link Type: free plans | Wood Source: Turnedtreasures | Fix Link? |
|
|
Bowls, Carving Large
These bowls are patterned after a traditional Scandinavian design and are sometimes called dough troughs. I make my bowls straight from the tree buy splitting a log and hollowing each half.
|
| Link Type: free plans | Wood Source: American Woodworker | Fix Link? |
|
|
Bowls, Routed
This online video from Woodsmith issue 170, we show how to shape beautiful bowls with a router. The secret is a collet extension that allows the bit to reach the bottom of the blank.
|
| Link Type: free plans | Wood Source: Woodsmith | Fix Link? |
|
|
How to Turn a Basic Bowl Video
This simple project went from rough-sawn cherry blank, to finished bowl in only about an hour. Watch the video for step-by-step instruction and learn how it is done.
|
| Link Type: free plans | Wood Source: Start Woodworking | Fix Link? |
|
|
Nut Bowl
This nut bowl was turned in three separate segments, then glued and doweled together. Beautiful.
|
| Link Type: free plans | Wood Source: LeesWoodProjects | Fix Link? |
|
|
Pedestal Bowl
Turn an eccentric pedestal bowl using these free instructions. In eccentric woodturning, you create a finished piece with one or more elements that are offset from the true center.
|
| Link Type: free plans | Wood Source: CanadianWoodworking | Fix Link? |
|
|
|
Plywood Bowl
Follow along and see how plywood is used to turn this beautiful bowl. Apparently birch plywood is ideal for this project.
|
| Link Type: free plans | Wood Source: WoodworkersInstitute | Fix Link? |
|
|
Round Bottom Bowl
Follow along with this step-by-step tutorial on how to create a round bottom bowl on the lathe.
|
| Link Type: free plans | Wood Source: WoodworkersInstitute | Fix Link? |
|
|
Turned Wood Bowl
Use a lathe to turn out a one-of-a-kind decorative bowl.
|
| Link Type: free plans | Wood Source: HGTV | Fix Link? |
|
|
Wing Bowls
To make these bowls, in addition to the turning tools, you will also need an angle grinder and a carver.
|
| Link Type: free plans | Wood Source: WoodworkersInstitute | Fix Link? |
|
More Woodworking Information on these Workshop Pages:first prev 1
2
|
|
Round Bottom Bowl
Follow along with this step-by-step tutorial on how to create a round bottom bowl on the lathe....
WoodworkersInstitute (free plans)
Try your own Google Search for
bowls, lathes, woodturning, diy |
| Our Online Store New Plans & Updated Products |  |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
