Nearly all geese, including goslings, are lifelike unless they are being made ready for the pot but this gray-goose is lifelike in that her head moves out from and back toward her body when she is drawn over the floor by a string.
If this little pony and cart are to be played with in the house you can make it the size marked in Fig. 102 but if it is to be used out-of-doors then you should make it twice the size.
Here is a unique and fun wood project that is child friendly! Three bunnies are cut in a cleaver way that allows them to form a puzzle. They fit together snugly and are painted as one to look like a mother bunny snuggling with her little ones. However, when pulled apart, they magically become three bunnies!
The smallest childrens block toys should not be smaller than a 1×2 and even that is a choking hazard for under 3 years old. I think giving these to younger than 3 is just asking for trouble as blocks hurt when thrown or smashed down.
These plans show the current design of the 1/2a hovercraft. The plans are free to download and copy for reference or as a guide to build your own hovercraft.
This is not an original design, I built this toy based on a photo that I came across. I had been planning to build a pull toy following the traditional balls in a cage inches design which I had read in a book. When I came across this design I was captivated by the intricate way the clacker blocks were mounted in between the wheels. The resemblance to the old-style push reel lawnmower, which I have and use, was another strong factor in my desire to build this toy.
Technical information for making a wooden rocking horse.
Follow along at the link with these free step-by-step instructions for building a childs playhouse bookcase.
Hi all. Here is an easy little toy you can whip up in an afternoon. This 10 inch pickup has a cartoon look with its over sized wheels and bright paint job. The wheels were turned on my lathe but you can buy pre made 2 1/4 inch wheels.
This is a cute VW Beetle car project, that takes a little thought, I had problems making the first set of fenders, I think I can cut through some of the trial and error for you. For material, I used walnut for the body and ash for the fenders.