This free woodworking projects plan information for making wooden knobs for hold down clamps is courtesy of ©2001 Dale Austin, Mr. Wizard at U of Michigan.
To meet clamping challenges head-on, I built this wall-mounted clamping station. It combines the glue-up area, clamps, and drying area into a single location. So there is no need to worry about cleaning off a workbench when it comes time to glue up a panel. The cutting diagrams and materials list are available to download in this Online Extra.
This is a handy easy to make clamp for picture frames with mitered corners.
When edge gluing boards, I use scrap blocks to distribute the clamping pressure and avoid marring the edges. But sometimes the blocks shift out of position or fall to the floor before I get the clamps tightened. To solve this problem, I made a number of U-shaped clamp blocks that slip over the edge and stay right where I put them.
Whenever I am assembling mitered frames, I have a difficult time holding the frame pieces in position while gluing or installing fasteners. But instead of buying an expensive corner clamp, I made my own using a couple of pipe clamps, as shown in the photo.
If manufactured clamps are not available, make these wedge clamps.
There are times when you just do not have enough clamps. But do not worry – you do not have to blow your budget on new ones. Here is an easy-to-build clamp that will work great for most projects.