Follow along at the link as Jay build a sliding moxon vise. At the end of the instructions you can download the free woodworking plan.
Make your own miter clamps with this great tutorial. Be sure to click on -next post- at the bottom of the page to continue. There are 5 pages in all.
This folding, portable project center features adjustable, clamping tops and a rock-solid base with a large shelf for storing your tools while you are working. The cutting diagrams and materials list are available to download in this Online Extra.
This is a link to a Google 3D SketchUp drawing for a corner clamp setup which effectively places good clamping across mitered corner joints and is shop made from scraps and 2 strips of sandpaper. You will need the SketchUp software to download this drawing and its freely available online.
This is a link to a Google 3D SketchUp drawing for a 4-corner adjustable wooden frame clamp. You will need the SketchUp software to download this drawing and its freely available online.
This is a link to a Google 3D SketchUp drawing for a clamp vise which is very useful for small work or for holding material to be worked on a drill press. You will need the SketchUp software to download this drawing and its freely available online.
This wall-mounted glue-up rack saves space, stores pipe clamps, and makes it easy to glue up panels.
This drill press vice will help make precise items by the measurements given on particular 2D drawings. The measurements are given in millimeters, and the measurements in inches are given in brackets.
When gluing and clamping small parts together, it is always a challenge to align large clamps to hold them in place as the glue dries. To make this job easier, I built the small parts clamp you see in the photo.
Occasionally, I will need to sand a small wooden part on a drum or disk sander. But holding onto small parts can be a challenge. A pair of pliers could do the job, but I wanted something with a softer grip. So I came up with the small parts clamp shown in the photo.