Follow along at the link (there is a video as well) and make your own turned plywood coffee tamper. Everyone could use one of these, right?
This platter was turned from walnut and measures about 14 inches in diameter. You only need 4 turning tools for this project. The blank was about 1 1/2 inches thick. Follow along at the link to see how it was turned.
Contrasting wood gives this turned bowl a sunrise effect. So nice. Follow along at the link to see the step-by-step instructions.
This turned wave platter started off as a piece of maple that was square at 12 x 12 x 2 inches. It is a great woodturning project using left over pieces from other projects.
The wood portion of this clock is made up of two circular rims, a base, column support and a top finial. A skeleton clock is a clock in which you can see all of the inner gears, wheels and springs inside the movement.
Follow along at the link and see how to make your own segmented bowl with epoxy resin rings. Great tips and tricks to the process.
The captive rings can present a puzzle to those who do not know how they are created. These rings are loose yet remain captured by the work piece.
Follow along with the free instructions including lots of pictures and turn your own wooden scoops.
Follow along and learn how to turn a small lidded box. Perfect for small trinkets or treasures.
Learn how to turn a segmented bowl from a single board on a lathe. Lots of pictures and step-by-step instructions to help you complete this project.